You are here: Ex.Military All Terrain Vehicles | Hagglunds BV206 DROPS Unit (multilift Palfinger)

Hagglunds BV206 DROPS Unit (multilift Palfinger)

Manufactured by: Hagglunds

ID: 172 \| Ref MOD:50003 Units Available for sale: 1 Condition: Mileage Hrs/Kms: Year of Manufacture: 1991	The price: P.O.A.
All prices are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation and is conducted at the time of inspection or provision of LOI.

Photo's shown above may represent a vehicle type rather than an actual vehicle, vehicles are available serviced and painted to customers preference. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.

Hagglunds BV206 DROPS Unit (multilift Palfinger)

Used Refurbished Hagglunds BV206 DROPS Unit (multilift Palfinger) for sale

Novice. Please don't copy or download any of these photos for posting on the Internet or for promotional use. Please send us a personal message if you would like to use them.

Video Hagglunds BV206 DROPS Unit (multilift Palfinger)

SPEC SHEET (Description) Hagglunds BV206 DROPS Unit (multilift Palfinger)

Hagglund BV206 DROPS Unit multilift (LOADMASTER-II) is not a well known brand in the civillan market but within military circles Hagglunds is a very well known and respected brand.
Payloads carried on the Multi-Lift system are usually attached to a standard flatbed frame or drop side cargo body as shown below.

This permits a variety of systems to be carried which can range from a standard palatised load to a more structured unit including fire fighting systems which can be carried into rough terrain and dropped off or even as ambulances where the body can be detached and left as a mobile theatre.
Here you can see the actual mechanism at work.

The Hagglunds BV206 load carried is angled (apporx 45 degrees) as it comes off the rails and as it makes contact with the ground the vehicle slowly moves forward keeping pace with the hydraulic arm until the load is safely on the ground.

The arm is retracted and the Hagglund BV206 vehicle is ready to collect another load.
The most popular forms of load carried are the drop side cargo body which covers a multitude of roles, and the tanker which can be used to supply Fuel Oil or Gas or water be it drinking or as used for fire fighting.

As you can see both units emply the A-Frame arrangement onto which the Multi-Lift arm connects.
With a drop side body it the unit can also double up and be used as a tipping body.

By simply opening the rear side door and raising the arm, the unit is in effect working as a standard tipper body whilst still being able to fulfill multiple roles by simply changing pods.

Details Hagglunds BV206 DROPS Unit multilift

Manufacturer: Hagglund
ENGINE

Industrial Ford V6 Gasoline
- Cylinders V6
- Power 99 KW(132hp) at 4600 1/min
- Capacity 2.8 litre
- Cooling system closed, with expansion tank
- Normal operating temperature 82-97 °C
- Lubrication forced-circulation with thermostat-controlled air-cooled oil cooler
- Air cleaner dry typ
- Fuel Consumption Ca.22 Liter/h
NEW engine Ford ZSO 424 RANGE (NEW INSTALLATION)
- Capacity 2.4 litre
- Power 136 HP 4000 1/min
- Cooling system closed, with expansion tank
- Normal operating temperature 82-97 °C
- Lubrication forced-circulation with thermostat-controlled air-cooled oil cooler
- Air cleaner dry typ
- Fuel Consumption approx Ca.11 Liter/h
- Any standard diesel can be used with this engine
- Direct injection combustion system with four valves per cylinder giving excellent
fuel economy and low emission levels
- Twin chain driven overhead camshafts (hollow) operating the valves via rocker
arms and hydraulic tappets
- Camshaft carrier to support both camshafts
- Aluminium cylinder head in two pieces (reduced height)
- Aluminium
intermediate housing with separate
pressed steel oil pan to increase cylinder block stiffness and reduce noise
- Multilayer steel cylinder head gasket
- Chain driven oil pump
- Combined oil filter and oil cooler
- Electronically controlled and chain driven fuel injection pump
- Electric fuel lift pump
- Electronically controlled EGRsystem
- Engine testing and fault diagnosis can be carried out by
means of the WDS analyser via the Data
Link Connector in the wiring loom
- Thermo-plastic intake manifold
- Integrated turbocharger/exhaust
manifold
- Central two stage high pressure fuel injectors for improved
combustion
- Sound deadened steel front cover

Dimention BV206
Length ............................ 6900 mm
Width .............................. 1870 mm

Height
front car ..................... 2300 mm
rear car ...................... 2450 mm

Specific ground pressure
front car ...................... 11,8 kPa
rear car ....................... 13,8 kPa

PERFORMANCE
Max. speed on roads ....... 52 km/h
in water .......... 4 km/h

Gradeability
hard surface ........... 100% (45°)
deep snow ................ 30% (17°)

Range on roads ................ 330 km

Operating temp
max ............................... + 46°C
min ................................. - 40°C

GEARBOX
Make .... Mercedes-Benz W4A-040
Type ... Automatic 4 speed forward 1 reverse
Transfer gearbox manufacturer........... Hagglunds Vehicle AB

Gear ratios
high ................................. 1.28:1
low ................................... 2.11:1

STEERING SYSTEM
Type .......... Hydrostatic, ariculated
Swept diameter ..................... 16 m
Emergency steering ....... Standard

TRACKS
Type ..... Moulded rubber with cord
Width ................. 620 mm (24.4 in)
4-track drive

ELECTRICAL SYSTEM
Voltage ........................... 24 V DC
Alternator ............................. 100 A
Batteries ............... 105 Ah, 2x12 V

FUEL
Tank contents .............160 Litres
Road range .............. 330 km with one tank filling

BREAK SYSTEM
Hydraulic disk brake as main brake and manual disk brake as emergency brake

BODIES
Material .........Glassfibre reinforced plastic with PVC
foam insulation
Seating: 6 in Front Compartment, 11-17 in Rear Compartment

Cargo space 8 m3 (283 ft3)
Curb weight 4330 kg (9545 lbs)
Maximum trailer weight 2500 kg (5500 lbs)
Specific ground pressure Front/Rear car 11.6/13.6 kPa (1.68/1.97 PSI)
0.2/0.05 m sinkage

Optional Accessories and Upgrades Include for the Hagglunds BV206 DROPS Unit multilift :

Full Resprays (Internal & External)
Radio Communications
Eurobar Light Bar Inc. 4 x Spotlights
Intercoms
Front Mounted Recovery Winch
Customised Interiors
Jerry Cans
Bush Bars
Light Bars
Additional Lighting
Colour Coded Canvas
GPS

The price with Ford petrol/ new diesel engine

Released from service by the British MOD (Ministry of Defence)
Location: The Rocket site, DN10 6ET, Doncaster, The UK The Rocket site, DN10 6ET, Doncaster, The UK

Export Requirements: OGEL Stock (Open General Export Licence) Read more

To select multiple items click on the button below

For further information, please enter your details below;

* = Required Field

Title *

Name:*

Company:

Country: *

City:

Phone:

E-mail: *

* Please enter your message in the box below:

Heard of you from:

Newsletter:

If you wish to be kept up to date with latest stock and availability.
* You will can cancel Email Alerts anytime..

Yes

BV206 » THE CUSTOMER CENTRE

For more details Ex Military vehicles or pricing on this or any other item, please contact us by
email or by click button "ADD TO ENQUIRY".

GENERAL TERMS

All prices qoted are GBP U.K. Pounds Sterling Ex. Works excluding VAT where applicable and shipping / associated costs.
Vehicles advertised are subject to remaining unsold.
All prices quoted are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation and is conducted at the time of inspection or provision of LOI.
For complete Terms & Conditions See Main Website. Sale Terms... Click to View Details

SPARE PARTS

We stock parts and accessories for every application: transmissions, repair kits, tyres, engines, undercarriage, belts, oils, filters and so much more! We have a full stock of spare parts, new and second hand. These parts are always on stock which avoids and delays in ordering.